Primer Design

Primers can be designed directly against the sequences annotated in CnidoSite, or against a sequence you paste in. Design is performed by primer3 (version 2.6.1) running on this server — your sequence is not sent to any third-party website. For reference, the primers released with this database were designed with an optimal melting temperature of 60°C (58–62 °C), an optimal primer length of 20 bp (18–24 bp), and a GC content between 40% and 60%, with self-complementarity restricted to limit primer-dimer formation; that parameter set is the CnidoSite published protocol preset below.

Template taken from CnidoSite: ANN02400-RA (ANN02400-RA), 1,278 bp.
Template

Two ways to supply a template: pick a species and a gene / transcript ID, or paste your own sequence. If the gene ID is found it is used; the pasted sequence is used otherwise. A template must be at least 30 bp.

Load example sequence
Primer parameters
Advanced parameters (any field left empty keeps the preset value)

A value that is not a number is ignored. The product size range is applied only when both of its fields are filled in and the maximum is at least the minimum.

Melting temperature
Primer length and GC content
Product and output
Self-complementarity and probe
Download TSV
Design results sorted by primer3 penalty, lowest first

Template 1,278 bp · parameter preset CnidoSite published protocol (Tm 60 [58-62] °C, 20 [18-24] bp, GC 40-60%) · 5 primer pairs returned.

Pair Left primer (5'→3') Position Len Tm (°C) GC (%) Right primer (5'→3') Position Len Tm (°C) GC (%) Product (bp) Penalty
1 TCGATGGAATACGGCTCTGC 509–528 20 59.968 55.000 TGTTCCCCTTCCAGTTGCTC 740–759 20 59.890 55.000 251 0.143
2 TCGATGGAATACGGCTCTGC 509–528 20 59.968 55.000 TCTGTTCCCCTTCCAGTTGC 742–761 20 59.890 55.000 253 0.143
3 TCGATGGAATACGGCTCTGC 509–528 20 59.968 55.000 CTGTTCCCCTTCCAGTTGCT 741–760 20 59.889 55.000 252 0.143
4 TCGATGGAATACGGCTCTGC 509–528 20 59.968 55.000 TCCCCTTCCAGTTGCTCCTA 737–756 20 59.882 55.000 248 0.150
5 GATCCAGATGCTGCGTCAGA 864–883 20 59.896 55.000 CTGCTGTCATTCGCGTTCTG 1011–1030 20 59.906 55.000 167 0.198
Primer map pair 1 (lowest penalty) · product 251 bp at template position 509–759 · the two tracks are drawn at different scales

Left primer — binds the template strand as listed (5′→3′)Right primer — its reverse complement binds hereProduct

Template1,278 bpproduct 251 bp · template 509–759product 251 bpleft primer, template 509–528right primer anneals here, template 740–75913206409591,278Amplicon251 bpleft primer TCGATGGAATACGGCTCTGC · 5′→3′right primer TGTTCCCCTTCCAGTTGCTC · its reverse complement binds the template strandinterior 211 bp509572634697759
Left primer
TCGATGGAATACGGCTCTGC
template 509–528 · 20 bp · Tm 59.968 °C · GC 55.000 %
Right primer
TGTTCCCCTTCCAGTTGCTC
template 740–759 · 20 bp · Tm 59.890 °C · GC 55.000 %

Amplicon sequence (5′→3′ on the template strand, 251 bp) — blue is the left primer, red is where the right primer anneals. Copy from here to order or to check a base by eye.

TCGATGGAATACGGCTCTGCAAGGCCAAGAAATTCAAGTACAAGAATAAGGACATGACAGACCTTGAAGAGAAACTTAAAGAAGCGGAGGGTGCACGTCTGAAGTTAATTGTTACTGATGGTGTTTTTAGCATGGATGGCAAGGTTGCACCTTTAAATGAGATATGTGACTTAGCAGACAAATATGGTGCTCTAACATTTATAGATGAGTGTCATGCCACTGGATTTTTAGGAGCAACTGGAAGGGGAACA

The right primer is listed as its own 5'→3' sequence; what anneals to the template strand shown here is its reverse complement, so the highlighted stretch is complementary to the listed sequence. That is expected.

How to read this table. Position is a 1-based interval on the template, and both primers use the same convention: it is the stretch the primer occupies on the template strand (for the left primer, starting at its 5’ end; for the right primer, the region it anneals to, i.e. where the reverse complement of the listed sequence sits on the template). The two coordinates in a row can therefore be subtracted directly, and the amplicon view above marks both of them so you can check them by eye. Penalty is primer3’s weighted sum of the deviations from your constraints — lower is better, and the pairs are returned in that order. Tm is computed by primer3 from the SantaLucia thermodynamic parameters at the salt and primer concentrations in effect. The primer sequences themselves are 5’→3′ and can be ordered as they stand; the right primer anneals to the template as its reverse complement.

Specificity has not been assessed. This page only designs primers; it does not check whether they also anneal elsewhere in the genome or transcriptome. Once you have candidates, confirm each primer sequence with this site’s BLAST. The Tm and GC settings above are the design targets, and the annealing temperature still has to be optimised at the bench.

TOP