Primer Design

Primers can be designed directly against the sequences annotated in CnidoSite, or against a sequence you paste in. Design is performed by primer3 (version 2.6.1) running on this server — your sequence is not sent to any third-party website. For reference, the primers released with this database were designed with an optimal melting temperature of 60°C (58–62 °C), an optimal primer length of 20 bp (18–24 bp), and a GC content between 40% and 60%, with self-complementarity restricted to limit primer-dimer formation; that parameter set is the CnidoSite published protocol preset below.

Template taken from CnidoSite: Ahemp_004489-T1 (Ahemp_004489-T1), 739 bp.
Template

Two ways to supply a template: pick a species and a gene / transcript ID, or paste your own sequence. If the gene ID is found it is used; the pasted sequence is used otherwise. A template must be at least 30 bp.

Load example sequence
Primer parameters
Advanced parameters (any field left empty keeps the preset value)

A value that is not a number is ignored. The product size range is applied only when both of its fields are filled in and the maximum is at least the minimum.

Melting temperature
Primer length and GC content
Product and output
Self-complementarity and probe
Download TSV
Design results sorted by primer3 penalty, lowest first

Template 739 bp · parameter preset CnidoSite published protocol (Tm 60 [58-62] °C, 20 [18-24] bp, GC 40-60%) · 5 primer pairs returned.

Pair Left primer (5'→3') Position Len Tm (°C) GC (%) Right primer (5'→3') Position Len Tm (°C) GC (%) Product (bp) Penalty
1 TGGCGACCTGAAGACAGAAG 218–237 20 59.682 55.000 TGCTTTGGCAGTTACTCGGT 298–317 20 59.892 50.000 100 0.426
2 ATGGGAAGAGTTGCGCTTCA 239–258 20 59.963 50.000 ACAAAGGTGGGAGCCAGAAA 354–373 20 59.444 50.000 135 0.593
3 ATGGGAAGAGTTGCGCTTCA 239–258 20 59.963 50.000 AACAAAGGTGGGAGCCAGAA 355–374 20 59.444 50.000 136 0.593
4 TCCCAAACCGAGTAACTGCC 292–311 20 59.964 55.000 TCGCAGAGAGTAACGGCTTT 398–417 20 59.398 50.000 126 0.637
5 ATGGGAAGAGTTGCGCTTCA 239–258 20 59.963 50.000 TCGCAGAGAGTAACGGCTTT 398–417 20 59.398 50.000 179 0.638
Primer map pair 1 (lowest penalty) · product 100 bp at template position 218–317 · the two tracks are drawn at different scales

Left primer — binds the template strand as listed (5′→3′)Right primer — its reverse complement binds hereProduct

Template739 bpproduct 100 bp · template 218–317product 100 bpleft primer, template 218–237right primer anneals here, template 298–3171186370555739Amplicon100 bpleft primer TGGCGACCTGAAGACAGAAG · 5′→3′right primer TGCTTTGGCAGTTACTCGGT · its reverse complement binds the template strandTGGCGACCTGAAGACAGAAGTGCTTTGGCAGTTACTCGGTinterior 60 bp218243268292317
Left primer
TGGCGACCTGAAGACAGAAG
template 218–237 · 20 bp · Tm 59.682 °C · GC 55.000 %
Right primer
TGCTTTGGCAGTTACTCGGT
template 298–317 · 20 bp · Tm 59.892 °C · GC 50.000 %

Amplicon sequence (5′→3′ on the template strand, 100 bp) — blue is the left primer, red is where the right primer anneals. Copy from here to order or to check a base by eye.

TGGCGACCTGAAGACAGAAGAATGGGAAGAGTTGCGCTTCACCCTAAACAAAGAGGACATAGCTGTAAAGATGTTCCCAAACCGAGTAACTGCCAAAGCA

The right primer is listed as its own 5'→3' sequence; what anneals to the template strand shown here is its reverse complement, so the highlighted stretch is complementary to the listed sequence. That is expected.

How to read this table. Position is a 1-based interval on the template, and both primers use the same convention: it is the stretch the primer occupies on the template strand (for the left primer, starting at its 5’ end; for the right primer, the region it anneals to, i.e. where the reverse complement of the listed sequence sits on the template). The two coordinates in a row can therefore be subtracted directly, and the amplicon view above marks both of them so you can check them by eye. Penalty is primer3’s weighted sum of the deviations from your constraints — lower is better, and the pairs are returned in that order. Tm is computed by primer3 from the SantaLucia thermodynamic parameters at the salt and primer concentrations in effect. The primer sequences themselves are 5’→3′ and can be ordered as they stand; the right primer anneals to the template as its reverse complement.

Specificity has not been assessed. This page only designs primers; it does not check whether they also anneal elsewhere in the genome or transcriptome. Once you have candidates, confirm each primer sequence with this site’s BLAST. The Tm and GC settings above are the design targets, and the annealing temperature still has to be optimised at the bench.

TOP